SCHOENNER, 101/6S, c. 1905, standing steam engine, 43 cm tall, boiler with a diameter of 10.5 cm, burnished brass, base is made of casting, water level glass, whistle, regulator of centrifugal force, feed pump, flywheel with a diameter of 14 cm, brass burner is broken down, good condition

BING, 130/113, c. 1912, standing steam engine, 38 cm tall, boiler with a diameter of 8.5 cm, burnished brass, base casting, water level glass, whistle, regulator of centrifugal force, feed pump, original burner and funnel, good condition

FALK, 474/4, c. 1925, standing steam engine, 40 cm tall, boiler with a diameter of 8 cm, burnished brass, base is made of casting, water level glass, whistle, flywheel with a diameter of 11.5 cm, original burner and funnel, good condition

DOLL, 359/5, c. 1932, big standing steam engine, 50 cm tall, boiler with a diameter of 11 cm, base is made of casting, water level glass, whistle, regulator of centrifugal force, feed pump, original burner and funnel, good condition

BING, 130/114, c. 1912, standing steam engine, 42 cm tall, boiler 9.5 cm in diameter, burnished brass, base made of casting, water level glass, whistle, regulator of centrifugal force, feed pump, manometer, flywheel 10 cm in diameter, original burner and funnel, good condition

BING, 130/113, c. 1912, standing steam engine, 38 cm tall, boiler with a diameter of 9 cm, burnished brass, base is made of casting, water level glass, whistle, regulator of centrifugal force, feed pump, original burner and funnel, base with scratches on the paintwork that are caused of old age, good condition

MÄRKLIN, 4106/71/2, c. 1912, standing steam engine, 38 cm tall, boiler with a diameter of 8 cm, burnished brass, base is made of casting, old MÄRKLIN symbol, water level glass, whistle, flywheel with a diameter of 8 cm, funnel original?, burner was supplemented, good condition

BING, 8010, c. 1902, standing steam engine, 33 cm tall, boiler 8 cm in diameter, burnished brass, base was possibly once over painted, water level glass, whistle, flywheel 10.5 cm in diameter, original burner and funnel, good condition, small tender spots at funnel

BING, 130/34, c. 1912, standing steam engine, 35 cm tall, boiler with a diameter of 7 cm, burnished brass, base is made of casting, water level glass, whistle, burner original?, good condition

MÄRKLIN, 4106/71/2, c. 1912, standing steam engine, 36 cm tall, boiler with a diameter of 8 cm, burnished brass, base is made of casting, water level glass, whistle, flywheel with a diameter of 9 cm, original burner and funnel, good condition

BING, 130/56, c. 1905, standing steam engine, 45 cm tall, boiler with a diameter of 8 cm, burnished brass, base is made of casting, water level glass, whistle, flywheel with a diameter of 11.5 cm, original burner and funnel, good condition

FALK, 455/1S, c. 1923, standing steam engine, 35,5 cm tall, boiler with a diameter of 8 cm, burnished brass, base is made of casting, water level glass, whistle, funnel, original burner, feed pump, 1 strap is possibly missing, nice original condition

BING, 130/115, c. 1912, big standing steam engine, 46 cm tall, boiler with a diameter of 12 cm, burnished brass, water level glass, whistle, manometer, regulator of centrifugal force, feed pump, original burner, nice original condition

BING, 130/115, c. 1912, big standing steam engine, 46.5 cm tall, boiler with a diameter of 12 cm, burnished brass, water level glass, whistle, manometer, regulator of centrifugal force, original burner, minimally tender spots at boiler, nice original condition

MÄRKLIN, 4112/1, c. 1905, standing steam engine, 34 cm tall, surface area 25.5 cm by 16.5 cm, kettle has a diameter of 9 cm, water level glass, whistle, regulator of centrifugal force, feed pump, original burner funnel, flywheel has a diameter of 10 cm, base plate with up-painted tile pattern, small tender spot at boiler, old MÄRKLIN symbol, base plate with small scratches on the paintwork

BING, 130/111, c. 1927, small standing steam engine, 29 cm tall, boiler with a diameter of 6.5 cm, burnished brass, with burner, base made of varnished tin, used

MÄRKLIN, 4112/11, standing model steam engine, 1919, surface area 33 cm by 30 cm, height 42 cm, water level glass, manometer, whistle, feed pump, burner, funnel, boiler was burnished, 11.5 cm in diameter, good condition, with small scratches on the paintwork that are caused of old age

CARETTE, 688/1, c. 1910, small standing steam engine, 11 cm by 8 cm by 23 cm, boiler with a diameter of 5 cm, casting base, burnished brass boiler, with funnel original?, burner, good condition

BING, c. 1935, 30 cm tall, boiler with a diameter of 7 cm, burnished brass, flywheel with a diameter of 7.5 cm, base is made of casting, original burner, funnel, water level glass,whistle, good condition

DOLL, 320/5, c. 1934, big standing steam engine, 41 cm tall, boiler with a diameter of 8 cm, burnished brass, base is made of casting, water level glass, whistle, manometer, with funnel and burner, good condition

BING, 130/523, c. 1912, standing steam engine for ships, surface area wood 46 cm by 22 cm, with tin board, tile pattern, funnel, whistle, water level glass, burner, lamp, dynamo, control, boiler with a diameter of 8.5 cm, burnished brass, base plate with scratches on the paintwork that are caused of old age, otherwise good

BING, 130/521, c. 1912, standing steam engine for ships, surface area wood, 38 cm by 18 cm, tin board, tile pattern, standing boiler, 7.5 cm in diameter , burnished brass, funnel, whistle, water level glass, burner, manometer, dynamo, base plate with scratches on the paintwork that are caused of old age

BING, 130/605, c. 1909, stationary traction engine, 39 cm, on wooden board, boiler with a diameter of 10 cm, funnel, regulator of centrifugal force, manometer, water level glass, feed pump, burner, ladder, good condition

BING, 130/604, c. 1912, stationary traction engine, 34 by 16 cm, tin board with tile pattern, on a wooden board, boiler with a diameter of 9.5 cm, burnished brass, funnel, regulator of centrifugal force, oil regulator, whistle, water level glass, burner, feed pump, stairs, base plate with scratches on the paintwork, otherwise good

FALK, 456/S, c. 1912, stationary traction engine, 32 cm, boiler with a diameter of 11 cm, burnished brass, funnel, flywheel with a diameter of 12 cm, whistle, water level glass, burner, regulator of centrifugal force, feed pump, base plate with scratches on the paintwork, tender spot at the boiler under the funnel, with stairs, otherwise good condition

FALK, 456/3/S, c. 1909, stationary traction engine, 31 cm, boiler with a diameter of 10 cm, burnished brass, funnel, whistle, water level glass, burner, regulator of centrifugal force, with stairs, used, good condition

DOLL, 312/3, c. 1925, stationary traction engine, surface area 19.5 by 11 cm, boiler with a diameter of 5 cm, funnel, oscillated cylinder, whistle, burner, base plate was probably colorwise retouched

DOLL, 312/1, c. 1925, stationary traction engine, surface area 16 by 10 cm, boiler with a diameter of 4 cm, burnished brass, funnel, oscillated cylinder, burner, good condition

BING, 130/206, c. 1930, small traction engine, surface area 20 by 10 cm, tin, tile pattern, boiler with a diameter of 3.5 cm, brass, funnel, oscillated cylinder, whistle, burner, crown at funnel was over painted, otherwise very good condition

MÄRKLIN, 4146/5, c. 1925, stationary traction engine, surface area 21.5 by 15 cm, boiler with a diameter of 5 cm, burnished brass, funnel, whistle, water level glass, burner (possibly a bit colorwise retouched)

473/1, c. 1912, small stationary traction engine, surface area 17 by 10.5 cm, boiler with a diameter of 5 cm, burnished brass, funnel, whistle, burner, used, good condition, base plate with scratches on the paintwork

MÄRKLIN, 1886 SCH, c. 1925, small stationary traction engine, surface area 18 by 13 cm, boiler with a diameter of 5 cm, polished brass, funnel (original?), whistle, water level glass, burner, used

BING, 130/207, c. 1913, stationary traction engine, surface area 22 by 11 cm, tin tile pattern, boiler with a diameter of 3.5 cm, whistle, oscillated cylinder, funnel, burner, soldered flywheel, good condition

FALK, c. 1915, stationary traction engine, surface area 22 by 13 cm, funnel, whistle, burner, good condition

FALK, c. 1910, small stationary traction engine, 20 cm, boiler with a diameter of 5.6 cm, burnished brass, base is made of varnished casting, funnel, whistle, water level glass, burner, good condition

BING, 130/583, c. 1912, stationary traction engine, surface area 26.5 cm by 15 cm, boiler with a diameter of 7 cm, burnished brass, funnel, whistle, water level glass, burner, base plate was colorwise a little bit retouched

MÄRKLIN, 4157/7,5, c. 1909, heavy stationary traction engine, 29 cm, boiler with a diameter of 7 cm, burnished brass, base is made of varnished casting, funnel, flywheels with a diameter of 10 cm, 2 pistons, regulator of centrifugal force, whistle, water level glass, burner is a reproduction, colorwise retouched, rare

PLANK, 218/2, c. 1906, stationary traction engine, 26 cm, boiler with a diameter of 8 cm, burnished brass, up-painted ornamantel stripes, base, varnished casting, funnel, whistle, water level glass, burner, hand feed pump, at the side a brass sign UNION

BING, 130/601, c. 1912, stationary traction engine, surface area 23 cm by 12 cm, boiler with a diameter of 6 cm, burnished brass, funnel, whistle, water level glass, burner, wood base, tin tile pattern, burner, guidance

SCHOENER, 107/12, c. 1905, stationary traction engine, 26 cm, boiler with a diameter of 8 cm, burnished brass, base made of varnished casting, funnel, 1 end piece of the conduction is break off, whistle, water level glass, burner, used

PLANK, 218/1, c. 1914, stationary traction engine, 29 cm, boiler with a diameter of 8.5 cm, burnished brass, with up-painted ornamantel stripes, funnel, whistle, regulator of centrifugal force, water level glass, burner, base, varnished casting, flywheel with a diameter of 11.5 cm, with sign UNION, good condition

FALK, 456/0/0S, c. 1920, stationary traction engine, 24 cm, boiler with a diameter of 7 cm, burnished brass, funnel, whistle, water level glass, original burner, feed pump, base, varnished casting, with smaller scratches on the paintwork, all in all good

SCHOENER, 107/13 S, c. 1907, stationary traction engine, 30 cm, boiler with a diameter of 9 cm, burnished brass, funnel, regulator of centrifugal force, whistle, water level glass, burner, feed pump, used, base plate with scratches on the paintwork

DOLL, 510/3, c. 1932, stationary traction engine, 31 cm, boiler with a diameter of 9 cm, burnished brass, funnel, regulator of centrifugal force, whistle, manometer, water level glass, burner, base, casting, varnished, a bit used, good

BING, 1308/7, c. 1906, stationary traction engine, surface area wood, 28 cm by 15 cm, on a tin base, casting, boiler with a diameter of 8.5 cm, burnished brass, funnel, regulator of centrifugal force, whistle, water level glass, feed pump, burner, the scratches on the paintwork are caused of old age, otherwise good

BING, 130/606, c. 1910, stationary traction engine, 42 cm, wood, base is made of tin, tile pattern, boiler with a diameter of 12 cm, funnel, flywheel with a diameter of 13.5 cm, regulator of centrifugal force, stairs, whistle, manometer, water level glass, burner, feed pump, nice original condition with some paint defects at bottom that are caused of old age

DOLL, 512/3, c. 1925, big stationary traction engine, 41 cm, boiler with a diameter of 10 cm, burnished brass, funnel, regulator of centrifugal force, 2 cylinders, flywheels with a diameter of 10.5 cm, manometer, whistle, water level glass, original burner, at the side 2 stairs, feed pump, base, varnished casting, regulator of centrifugal force, base with smaller scratches on the paintwork, otherwise good, an impressing steam engine

SCHOENER, 107/15 S, c. 1913, big stationary traction engine, 33 cm, boiler with a diameter of 10.5 cm, burnished brass, base, varnished casting, funnel, regulator of centrifugal force, whistle, water level glass, burner, ladder, feed pump, flywheel with a diameter of 12.5 cm, partially colorwise retouched

FALK, 456/3/3 S, stationary traction engine, c. 1915, 31 cm, boiler with a diameter of 10 cm, burnished brass, fkywheel with a diameter of 10 cm, funnel, regulator of centrifugal force, whistle, water level glass, feed pump, stairs, burner, base plate with scratches on the paintwork, otherwise good

DOLL, 510/5, c. 1923, big stationary traction engine, 36 cm, boiler 11cm in diameter, burnished brass, funnel, regulator of centrifugal force, water level glass, burner, feed pump, stairs, base, varnished casting, case and base with scratches on the paintwork that are caused of old age, grand size