^
Autumn auction September 28/29, 2012
Autumn auction September 28/29, 2012 - Page 3 / 40
Complete catalog (1953 items)
 

All
All


No. 101
Limit: 70 €
wainwright, handpainted tin,, 13 cm, straps at bottom plate were afterwards soldered, the scratches on the paintwork are caused of old age, c. 1910
Hammerprice: 100,00 €

No. 102
Limit: 60 €
drive model, probably Carette, wainwright, handpainted tin, height 11.5 cm, partially colorwise retouched, soldered joints were partially afterwards soldered

No. 103
Limit: 60 €
miner, c. 1910, handpainted tin, height 12.5 cm, soldered joints were afterwards soldered, the scratches on the paintwork are caused of old age

No. 104
Limit: 120 €
drive model, forge, probably Arnold, c. 1930, height 12.5 cm, lithographed tin, good condition

No. 105
Limit: 90 €
FLEISCHMANN, 3 pieces, drive model, man at anvil, height 9.5 cm, 1 x forge, height 11 cm, 1 man at the sausage machine, height 8.5 cm, used, with scratches on the paintwork
Hammerprice: 120,00 €

No. 106
Limit: 60 €
FLEISCHMANN, 3 pieces drive model, well with water wheel, 16 cm, good condition, small sausage machine, sausage is missing, 1 x man at anvil, base plate with scratches on the paintwork

No. 107
Limit: 60 €
2 pieces drive models, probably Doll, wind turbine with stone smashing mechanism, handpainted tin, height 23.5 cm, partially colorwise retouched, 1 x saw for wood, 12 cm, good condition

No. 108
Limit: 30 €
3 pieces lithographed tin, drive model, Kraus, man at the boring machine, 14.5 cm, man at saw, 10.5 cm

No. 109
Limit: 120 €
probably Bing, standing steam engine, 30 cm, with manometer, water level glass, whistle, burnished boiler, 7 cm in diameter, without burner, used
Hammerprice: 150,00 €

No. 110
Limit: 120 €
FALK, stationary traction engine, height 36 cm, boiler with a diameter of 9 cm, water level glass, manometer, whistle, regulator of centrifugal force, feed pump, restored, funnel and burner were probably supplemented
Hammerprice: 250,00 €

No. 111
Limit: 60 €
FALK, stationary traction engine, surface area 16.5 cm x 24 cm, water level glass was supplemented, whistle, funnel, with burner, polished boiler, partially colorwise retouched
Hammerprice: 70,00 €

No. 112
Limit: 160 €
DOLL, lying steam engine, surface area 37 cm x 34 cm, burner, funnel, water level glass, whistle, feed pump, used, good, burnished boiler, 7 cm in diameter
Hammerprice: 200,00 €

No. 113
Limit: 130 €
probably Bing, standing steam engine, 33 cm, casting base, burnished boiler, with a diameter of 6 cm, manometer, water level glass, whistle, burner, with 1 drive Fleischmann, man at anvil
Hammerprice: 180,00 €

No. 114
Limit: 30 €
BING, small steam engine, surface area 18 cm x 20 cm, oscillated cylinder, polished boiler, without burner, funnel isn't original, used

No. 115
Limit: 120 €
steam engine, marked G & K, Gras & Koll, 21 cm, standing, oscillated cylinder, boiler polished, with a diameter of 5.5 cm, with burner, casting base, base was probably colorwise retouched
Hammerprice: 200,00 €

No. 116
Limit: 60 €
FLEISCHMANN, lying steam engine, surface area 34.5 cm x 28 cm, polished boiler, 6 cm in diameter, manometer, water level glass, whistle, with burner, used
Hammerprice: 70,00 €

No. 117
Limit: 140 €
A. Kenzo Rehse Leipzig, 1920, stationary traction engine, with gas powered, surface area is made of wood, 35 cm x 21 cm, water level glass, whistle, manometer, regulator of centrifugal force, boiler made of polished brass, good condition, technical not checked
Hammerprice: 180,00 €

No. 118
Limit: 60 €
FLEISCHMANN, mixed lot of drive models, 3-pieces, man at the grinding machine, 9 cm, man at the sausage machine, sausage is loosely add, used, bottom with scratches on the paintwork, small windmill, used, good

No. 119
Limit: 20 €
mixed lot of 10 pieces, drive models, casting or bakelite, early GDR-production, bench, drill, saw, good condition
Hammerprice: 111,00 €

No. 120
Limit: 40 €
2 pieces drive model, varnished tin, 1 soldered joint was afterwards new soldered, hammer mechanism, small windmill

No. 121
Limit: 70 €
drive model of a steam engine, mixed lot of 4 pieces, man at saw, 13.5 cm, 2 x man at whet-stone, 1 x man at stone smashing mechanism, partially good condition, 1920-30

No. 122
Limit: 40 €
BING, small standing steam engine, 25 cm, burnished boiler, with a diameter of 5 cm, whistle, oscillated cylinder, with burner, base was probably colorwise retouched, used
Hammerprice: 60,00 €

No. 123
Limit: 60 €
small hot air motor, brass, installed on a wood base, 10.5 cm
Hammerprice: 90,00 €

No. 124
Limit: 60 €
hot air motor, 18 cm, without base and burner
Hammerprice: 110,00 €

No. 125
Limit: 30 €
steam engine, lying boiler, probably Wilesco, surface area 32 cm x 24 cm, nickel-plated boiler, with a diameter of 5.5 cm, manometer, whistle, without burner, otherwise good
Hammerprice: 50,00 €

No. 126
Limit: 30 €
FLEISCHMANN, steam engine, lying boiler, surface area 26.5 cm x 35 cm, water level glass, whistle, regulator of centrifugal force, burner, used, burnished boiler, with a diameter of 6.5 cm
Hammerprice: 70,00 €

No. 127
Limit: 120 €
high transmission, with machine park, casting, wood base, c. 1920, surface area 45 cm x 23,5 cm, stamping machine, drill, 2 x whet-stone, 1 dynamo with wind turbine, with 1 stone smashing mechanism is made of tin
Hammerprice: 160,00 €

No. 128
Limit: 60 €
2 pieces drive model, handpainted tin, probably Doll, well with water wheel, 20 cm tall, 1 windmill, used, small scratches on the paintwork, good
Hammerprice: 60,00 €

No. 129
Limit: 60 €
2 pieces drive model, well, handpainted tin, 1 x surface area 14 cm x 14 cm, 1 x surface area 10.5 cm x 10.5 cm, the scratches on the paintwork are caused of old age, used

No. 130
Limit: 140 €
BING, stationary traction engine, surface area 22.5 cm x 12 cm, water level glass, whistle, funnel, burnished boiler, 6.5 cm in diameter, with burner, tender spot at boiler (funnel), scratches on the paintwork of the base plate is caused of old age
Hammerprice: 140,00 €

No. 131
Limit: 150 €
large model steam engine, drive, without boiler, heavy cast model, surface area 27 cm x 41 cm, complex solidly produced
Hammerprice: 260,00 €

No. 132
Limit: 240 €
model steam engine, filigree, heavy cast model, tin and brass parts installed on a marble top, height 31 cm, surface area 20 cm x 10 cm
Hammerprice: 280,00 €

No. 133
Limit: 30 €
standing steam engine, probably Bing, 30 cm, water level glass, whistle, burner, boiler burnished, with a diameter of 7 cm, good condition
Hammerprice: 70,00 €

No. 134
Limit: 140 €
DOLL, ferris wheel, 20 cm, varnished tin, mass figures, the scratches on the paintwork are caused of old age, all in all good condition
Hammerprice: 180,00 €

No. 135
Limit: 130 €
DOLL, factory building with chimney sweep, surface area 18 cm x 12 cm, used, good
Hammerprice: 550,00 €

No. 136
Limit: 160 €
BING, organ grinder, lithographed tin, used, music mechanism is intact
Hammerprice: 200,00 €

No. 137
Limit: 60 €
drive model, baker, handpainted tin, height 11 cm, used, with scratches on the paintwork, soldered joints were partially afterwards soldered
Hammerprice: 80,00 €

No. 138
Limit: 140 €
rack of an early steam engine, new producing, iron casting and brass parts, height 30 cm
Hammerprice: 140,00 €

No. 139
Limit: 160 €
lying steam engine, Lipsia, Leipziger Lehrmittelanstalt, c. 1920, surface area 24.5 cm x 22 cm, burnished boiler, with a diameter of 7 cm, water level glass, feed pump, whistle, without burner, used, good
Hammerprice: 220,00 €

No. 140
Limit: 140 €
BING, steam engine for ships, surface area 26 cm x 23.5 cm, boiler with a diameter of 5.5 cm, with burner, water level glass is missing, burnished boiler, manometer is faulty and caused of old age with scratches on the paintwork, used
Hammerprice: 180,00 €

No. 141
Limit: 60 €
GK, 2 pieces drive model, windmill and water mill with hammer mechanism, 24 cm and 11 cm, tall, used

No. 143
Limit: 60 €
DOLL, small stationary traction engine, surface area 15 cm x 10 cm, oscillated cylinder, whistle, funnel, burner is missing, boiler made of polished brass, used

No. 144
Limit: 120 €
drive model, 3 pieces handpainted tin, 2 x man at saw, 1 x man at chopping board, 13.5 cm, handpainted tin, used, with scratches on the paintwork, some soldered joints wer afterwards new soldered

No. 145
Limit: 60 €
KRAUSS, 3 pieces drive model, windmill with miller, 21 cm tall, 2 x water mill with stone smashing mechanism, good condition
Hammerprice: 60,00 €

No. 146
Limit: 80 €
3 pieces drive model, lithographed tin, 2 x man at anvil, 1 x man at the knocker, 1910-1920, used, good
Hammerprice: 80,00 €

No. 147
Limit: 180 €
hot air motor, probably Doll, 36 cm, casting, 1 x over painted, burner not original, with drive models Bing, man at well, transmission, knife grinder, man at chopping board, man at saw, drive components, used, good
Hammerprice: 400,00 €

No. 148
Limit: 60 €
FLEISCHMANN, transmission, with 3 drive model, digging wheel, windmill, water wheel, good condition

No. 149
Limit: 90 €
3 pieces drive model, casting stone smashing mechanism, lathe, stamping machine c. 1920, height 8 cm to 11 cm

No. 150
Limit: 90 €
3 pieces drive models, casting, 1910-1920, lathe, 2 x boring machine, height 11 cm to 14.5 cm

No. 151
Limit: 80 €
4 pieces drive models, handpainted tin, c. 1920, well, water wheel, whet-stone, windmill, 13 cm to 20 cm tall, used to good condition


Ladenburger Spielzeugauktion GmbH
Lustgartenstr. 6
68526 Ladenburg
Deutschland

BLEIBEN SIE MIT UNS IN KONTAKT
E-mail